How to Tips Computer assemble easily

Hello guys ...

Well this time the writer will write an article about How to Tips Computer assemble easily.

Assemble the computer is a series of activities to unite the parts in a computer so that it can be used as a full computer.

The real computer assembles it is easy for those who are accustomed to, but for those who still lay on the parts in a computer would have had difficulty in placing the components or parts of it, and do not know its functions. Well get on with it,

Step-by-step assembly

Here is a step-by-step assembly of PCs.

Place the motherboard on a flat place and do not forget to give the base with a soft surface so that the motherboard is not scratched or broken pathway components.

his next, Replace the processor on the motherboard. Note: Installation of processors try out the casing in order to facilitate you in the installation of the processor. 

Installation processor adapted to the type of processor and motherboard used.

Once the processor is installed and then perform the installation of the processor fan.

His next step Replace the RAM on the RAM slot available on the motherboard. Installation of RAM in slots must follow the rules because if there is an error in the installation can make the RAM and motherboard is damaged or frayed.

Prepare the chassis for installation of all components that have been provided. After preparing the casing attach the power supply or power supply as shown below.

Then enter the motherboard to the chassis slowly so that the motherboard is not damaged. At the time of installation of the motherboard, note connector mouse, keyboard, serial, VGA and sound so that the panels are installed on the casing properly.

Then screw the motherboard was his

In this example we use the motherboard is equipped with VGA, Sound Card, and LAN card built into the motherboard. Components that have become one with the motherboard called the component ON BOARD.

After the install CD ROM in the space provided on the casing

Then bolt the one CD ROM that has been installed earlier so as not to jiggle. After that plug in the power cable and data cable or cables ATA CD ROM on the motherboard.

Install a hard drive in the space provided on the casing by gently so as not to hit the hard disk. Because the components of this hard drive is prone tehadap shock. bolts securely so as not to shake.

Once the hard drive is installed and then plug the data cable or ATA hard drive cable to the motherboard and the hard disk itself.

for his next, Connect the power supply in place contained in the motherboard. If the installation is wrong it will cause fatal damage to the motherboard.

Then plug the power connector / restart / hdd lad / power lad and other connector pad located on the motherboard as shown below.

Once all the components have been installed and attach the chassis cover properly.

okay completed,

his next, we must examine whether the assembly is successful or not. Attach the monitor to the VGA port cable then the monitor and CPU power to the electrical switch, and turn on his computer, if the computer can boot the managed assembly. If it can not boot means assembly is not perfect, it must be refined in advance if you later want to install its operating system.

So the information, may be useful ..

Thank you ... !!!